Asus Motherboard DSBV-D - Manual (Page 101)

ASUS DSBV-D 4-33
The following items appear only if you enable the Power On By RTC Alarm
item.
RTC Alarm Date [0]
To set the date of alarm, highlight this item and press to display a date
chart. Press <+> or <-> to change scroll through the options, then press
when done. The default setting [0] is equivalent to everyday alarm.
Configuration options: [0] [1] ~ [31]
RTC Alarm Date [00 : 00 : 00]
To set the time of alarm:
1. Press <+> or <-> to set the desired value.
2. Use the left/right arrow key or press to move to the next field.
3. Press when done.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Full fan speed will
be started when the
temperature reaches the
selected target value.
Hardware Monitor
CPU1 Domain 0 Temperature 39 o C/102 o F
CPU1 Domain 1 Temperature 29 o C/84 o F
CPU2 Domain 0 Temperature 0 o C/32 o F
CPU2 Domain 1 Temperature 0 o C/32 o F
SYSTEM1 Temperature 39 o C/102 o F
SYSTEM2 Temperature 29 o C/84 o F
CPU_FAN1 Speed 2925 RPM
CPU_FAN2 Speed N/A
FRN_FAN1 Speed N/A
FRN_FAN2 Speed N/A
FRN_FAN3 Speed N/A
FRN_FAN4 Speed N/A
REAR_FAN1 Speed N/A
REAR_FAN2 Speed N/A
Smart Fan Control [Smart Fan II]
PhoenixBIOS Setup Utility
Advanced
4.4.8 Hardware Monitor
This menu shows the hardware monitor configuration settings. Select an item then
press to display the configuration options.
The following screens appear when you install Intel ® 5000 series CPU.