Samsung LS27A850TS-ZA - Manual (Page 61)

61
Setup and Reset
6
6 Setup and Reset
6.1.4 Eco Icon Display
Configuring Eco Icon Display
1
Press [ ] on the product.
2
Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ ] to move to ECO and press [ ] on the product.
4
Press [ ] to move to Eco Icon Display and press [ ].
The following screen will appear.
z
Off : Disable the Eco Icon Display function.
z
On : Display the operation status of the Eco sensor as a pop-up guide.
5
Press [ ] to move to the option you want and press [ ].
6
The selected option will be applied.
z
If the monitor is left idle for the period of time to which the off timer is configured when Eco
Motion Sensor is enabled, Eco Motion Sensor will activate and switch the monitor to power-
saving mode.
z
A 10-second countdown timer will start along with the above picture before the power-saving
mode activates showing the operation status of the Eco Motion Sensor .
z
If the screen brightness is adjusted according to the ambient light intensity when the Eco Light
Sensor is on, a pop-up as shown above will appear showing the adjusting screen brightness.
When Backlight is set to Off When Backlight is set to Dimming
5 Min
Dimming
Off
ECO
Eco Motion Sensor
೛Backlight
Eco Light Sensor
೛Sensitivity
೛Brightness Level
Eco Saving
Eco Icon Display ଥࢿ
Off
On
v sec
Eco Motion Sensor Activated
Dimming sec
Eco Motion Sensor Activated
Eco Light Sensor Activated Eco Light Sensor Activated