Sound mode, Basic functions, Dsp (digital signal processor) function – Samsung HT-C6730W-XAA User Manual
Page 52: Sfe (sound field effect) mode, Dolby pro logic ii mode
52
English
Basic Functions
Sound Mode
DSP (Digital Signal Processor) Function
DSP regulates the volume level and
decreases drastic volume changes
when you change channels or during a
scene transitions.
Press the DSP button.
SMART SOUND
¨ MP3 ENHANCER ¨ POWER
BASS
¨ DSP MODE OFF
• SMART SOUND : Regulates the volume level
and deceases drastic volume changes when
you change channels or during a scene
transition.
• MP3 ENHANCER : This also helps enhance
your sound experience (ex. mp3 music). You
can upscale your MP3 level sound (24 kHz,
8bit) to CD level sound (44.1 kHz, 16bit).
• POWER BASS : This function stresses low
tones providing deep, powerful sound effects.
SFE (Sound Field Effect) MODE
You can set the SFE mode best suited
for the type of music you are listening to.
Press the SFE MODE button.
HALL1
Provides a clear vocal as if
listening in a concert hall.
HALL2
Also provides a clear vocal as if
listening in a concert hall but, less
powerful than HALL1.
JAZZ
Recommended setting for Jazz.
CHURCH
Gives the feel of being in a grand
church.
ROCK
Recommended setting for Rock.
SFE OFF
Select this for normal listening.
Dolby Pro Logic
II Mode
You can select the desired Dolby Pro
Logic
II audio mode.
Press the
PL
II button.
Setting the speakers with DPL IIz
Set the DPL IIz of speaker settings to “On”.
(For further details, refer to page 34.)
Press the
PL II button of the remote
control until "DPL IIz” or “DPL IIz OFF”
appears on the display. Set to “DPL IIz” to
enable sound reproduction from front
center/height speakers.
DPLIIz
You can listen to a 2CH sound source in 7.1CH
surround sound with all speakers active.
- A specifi c speaker(s) may not be output
depending on the input signal.
DPLIIz
OFF
Select this option to listen through the front left/
right speakers and the subwoofer only.
Setting the speakers with DPL IIx
Set the DPL IIz of speaker settings to “Off”.
(For further details, refer to pages 34.)
Press the
PL II button of the remote
control until the desired setting is
displayed. Once selected with the desired
mode, sound will be heard through the
rear speakers.
MUSIC
When listening to music, you can experience
sound effects as if you are listening to the
actual performance.
MOVIE
Adds realism to the movie soundtrack.
PROLOG
You can listen to a 2CH sound source in 7.1CH
surround sound with all speakers active.
- A specifi c speaker(s) may not be output
depending on the input signal.
MATRIX
You will hear multi channel surround sound.
STEREO
Select this to listen to sound from the front left
and right speakers and the subwoofer only.
1.
2.
1.
2.
DSP
SFE MODE
HT-C6730W_XAA_0817.indd 52
HT-C6730W_XAA_0817.indd 52
2010-08-17 11:33:04
2010-08-17 11:33:04