Samsung SPH-A660MSPXAR - Manual (Page 98)

Section 2I: Using Your Phone’s Voice Services 90
To place a call using Digit Dial:
1. Activate voice recognition by pressing the navigation key left.
The phone prompts you for a command.
2. Say Digit Dial. The phone prompts you to say the number.
3. Say a valid 7 or 10 digit North American phone number
naturally and clearly.
4. If the phone asks you, "Did You Say," followed by the correct
number, say "Yes." You can also select the correct number
from those displayed on the screen by pressing
on the
correct number. The phone will then dial
the number.
5. If the phone asks you, "Did You Say," followed by an incorrect
number, say No. If there are other alternatives, the phone will
prompt you with the next one. You can also press the
navigation key up or down to select the correct number from
the Choice List, and then press
to dial.
Enabling/Disabling Digit Dial Choice Lists
You can customize whether the Digit Dial feature displays the list of
top voice recognition choices or automatically dials the first
number, without displaying a choice list.
To enable or disable choice lists for Digit Dial:
1. Press for Settings.
2. Press for Voice Dial.
3. Press for Choice List.
4. Press for Digit Dial.
Note: If desired, you can say the number "1" before the number. This is not
required; the call is made both ways.
Note: In some cases, the phone might ask you to repeat a number. Make sure
that the number is a valid 7 or 10 digit North American phone number,
and then say the number again. If the number isn't valid, or if the phone
still doesn't understand the number on the second try, it will not place
a call.