Samsung LN32A540P2DXZA User Manual
Page 26
English -
Temporary image retention may occur when viewing a static image on the set
for more than two hours.
after selecting “Zoom”, “Zoom” or “Wide fit”:
Press the ◄ or ► button to select “Position”, then press the
EntEr
button. Press the ▲ or ▼ button to move the picture up and down.
reset: Press the ◄ or ► button to select “Reset”, then press the EntEr
button. You can initialize the setting.
after selecting “Just Scan” in hDmI (080i) or Component (080i) mode:
Press the ▲ or ▼ button to select “H-Position” or “V-Position”, then press the
EntEr button.
Press the ◄ or ► button to adjust the screen Position. Press the
EntEr button.
reset: Press the ▲ or ▼ button to select “Reset”, then press the EntEr
button. You can initialize the setting.
HD (High Definition)
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
Input Source
Picture Size
TV, Video, S-Video,
Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i), HDMI
(720p, 1080i)
16:9, 4:3, Wide Fit, Just Scan
PC
16:9, 4:3
Alternately, you can press the
P.SIZE button on the remote control repeatedly to
change the picture size.
6:
Zoom U move
Zoom U move
16:9
Sets the picture to 16:9 wide mode.
Zoom1
Magnifies the size of the picture on the
screen.
Zoom2
Magnifies the size of the picture more
than “Zoom1”.
Wide fit U move
:
Just Scan
Wide Fit
Enlarges the aspect ratio of the picture
to fit the entire screen.
4:3
Sets the picture to 4:3 normal mode.
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i), Component (1080i) or
DTV (1080i) signals are input.
➣
➣
➣
➣
➣
O
adjust
Enter
return
6 :
Zoom
Zoom
Wide fit
:
Just Scan
Size
tV
Position
reset
move
Enter
return
6 :
Zoom
Zoom
Wide fit
:
Just Scan
►
Size
tV
move
Enter
return
h-Position
0
V-Position
0
reset
Just Scan
tV
BN68-01393L-00Eng.indd 24
2008-05-13 ¿АИД 4:53:01