American Dynamics MegaPower CPU ADMPCPU - Manual (Page 18)

MEGAPOWER CPU 8200-0421-02, REV. E
OPERATOR’S GUIDE 16 of 21
Function Actions
Call Preset -Call camera -enter the Preset # -press
Run Tour -Select monitor -enter Tour # -press
Control Tour • To hold a Tour, hold down and press
• To restart a Tour, press
• To step forward or backward through a Tour, press or
• To reverse the direction of a Tour, press once. To resume forward, press
once.
• To stop a Tour, call a camera.
Call Salvos -Enter lowest monitor # -press -enter Salvo # -hold down and
press
Acknowledge Alarm -Call alarming monitor -press
View Multiple
Sequencing Alarms
-Press and to hold sequence -press or to step through
alarms
Control Auxiliary -Call camera -press:
• Auxiliary 1 on/off
• Auxiliary 2 on/off
• Auxiliary 3 on/off
• Auxiliary 4 on/off
Note: Auxiliary 4 is not supported by all dome/PTZ protocols and configurations.
Lock Camera On/Off
-Enter camera # -hold down and press
View Satellite Sites -Enter site # -hold down and press -call camera as usual
Note: This function only displays the previous user-selected site number.
Disconnect/Log Off
Satellite -Enter local site # -hold down and press -call local camera
Run Pattern -Call camera -enter Pattern # -press
Keyboard Contrast
-Press and -use Focus and to increase/decrease contrast
-press ENTER
VCR Mode -Enter VCR # -press
F2 Functions
-Enter function # -press and hold -press