American Dynamics MegaPower CPU ADMPCPU - Manual (Page 15)

MEGAPOWER CPU 8200-0421-02, REV. E
OPERATOR’S GUIDE 13 of 21
Function Actions
Control Tour
To stop a tour, press HOLD soft key
To restart a tour forward, press Run soft key
To change direction (forward or reverse) of executing a tour, press T key or S key
To manually step through the cameras of a tour that is on hold, press T key or S key
Call Salvo -Enter lowest monitor # -press MONITOR
-enter Salvo # -press SALVO soft key
Acknowledge Alarm
-Call alarming monitor -press ALARM soft key
View Multiple Alarms -Press RUN/HOLD soft key -press T key or S key
Control Auxiliary -Call camera -press
AUX 1
= auxiliary currently off, turns auxiliary on;
= auxiliary currently on, turns auxiliary off
Lock Camera -Enter camera # -press CAMERA -press OPERATOR tab key, then
NEXT soft key -press LOCK CAMERA soft key
Unlock Camera -Enter camera # -press CAMERA -press OPERATOR tab key, then
NEXT soft key -press UNLOCK CAMERA soft key
View Satellite Sites
-Press OPERATOR tab key -press NEXT soft key -enter site #
-press SITE soft key -call remote cameras as if local
Note: This function only displays the previous user-selected site number.
Disconnect/Log Off
Satellite
-Press OPERATOR tab key -press NEXT soft key -enter local site #
-press SITE soft key -call local camera
Run Pattern -Press OPERATOR tab key -call camera -enter Pattern # -press
PATTERN soft key
Keyboard Brightness Operator Mode Smart Card:
-Press USER SETTINGS tab key -press + or – soft keys to increase/decrease
brightness
Administrator/Supervisor Smart Card:
-Press PROGRAM MODE tab key -press KEYB CONFIG soft key
-press + or – soft keys to increase/decrease brightness
Keyboard Contrast Operator Mode Smart Card:
-Press USER SETTINGS tab key -press + or – soft keys to increase/decrease
contrast
Administrator/Supervisor Smart Card:
-Press PROGRAM MODE tab key -press KEYB CONFIG soft key
-press + or – soft keys to increase/decrease contrast
Run Macro -Press MACROS tab key -press NEXT or PREVIOUS to select desired macro
page -press soft key associated with macro’s icon