Samsung BD-D5700-ZA - Manual (Page 24)

24
English
Connections
Case 2 : Connecting to an Audio
System (AV receiver with Dolby
Digital or DTS decoder) - Better
Quality
1. Using an optical cable, connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the
rear of the player to the DIGITAL AUDIO IN
(OPTICAL) terminal of your AV receiver.
2. Using the video signal cable(s), connect the
HDMI, or VIDEO OUT terminals on the rear of
the player to the HDMI, or VIDEO IN terminal
of your TV. (See pages 21~22)
3. Turn on the player, TV, and AV receiver.
4. Press the input select button of the AV receiver
to select the external input and hear sound
from the player. Refer to your AV receiver’s user
manual to set the AV receiver’s audio input.
5. Press the input selector on your TV remote
control to select the video source (HDMI, or
Video.)
Case 3 : Connecting to an Audio
System (Stereo Amplifier)
- Good Quality
1. Using the audio cables, connect the AUDIO
OUT (red and white) terminals on the rear of
the player to the AUDIO IN (red and white)
terminals of your Stereo Amplifier.
2. Using the video signal cable(s), connect the
HDMI, or VIDEO OUT terminals on the rear of
the player to the HDMI, or VIDEO IN terminal
of your TV. (See pages 21~22)
3. Turn on the player, TV and Stereo Amplifier.
4. Press the input select button of the Stereo
Amplifier to select the external input in order
to hear sound from the player. Refer to your
Stereo Amplifier’s user manual to set the Stereo
Amplifier’s audio input.
5. Press the input selector on your TV remote
control to select the video source (HDMI, or
Video.)
✎ NOTE
` If you use the Digital Audio connection described in Case 2, you will hear only front two speakers with Digital Output
setting as PCM.
White Red
Case 2 : Optical cable
(not included) Case 3 : Audio cable