Samsung EC-TL500ZBPBUS User Manual
Page 107
Appendixes
106
Camera settings menu
Item
Description
Imprint
Set whether to print the date and time on your photos
when printing. (Off*, Date, Date & Time)
The date and time will be displayed on the
t
bottom-right corner of the photo in yellow.
The date and time may not be printed on some
t
printer models.
If you select
t
Text in the s mode, the date
and time is not printed.
Auto Power
Off
Set the camera to automatically turn off when you are
not using it. (Off, 1 min, 3 min*, 5 min, 10 min)
Your settings will not change after you replace
t
the battery.
The camera will not automatically turn off when:
t
It is connected to a computer or printer.
-
You are playing a slide show or videos.
-
You are recording a voice memo.
-
Video Out
Set the video signal output according to your region.
NTSC
t
*: USA, Canada, Japan, Korea, Taiwan,
Mexico.
PAL
t
(supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, Finland, Germany,
England, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand,
Norway.
Item
Description
Date & Time
Set the date and time and select a date format.
(Off*, dd/mm/yyyy, mm/dd/yyyy, yyyy/mm/dd)
File No.
Specify how to name files.
Reset
t
: Set the file number to start from 0001 after
inserting a new memory card, formatting a memory
card, or deleting all files.
Series
t
*: Set the file number to follow the previous
file number after inserting a new memory card,
formatting a memory card, or deleting all files.
The default name of the first folder is 100PHOTO
t
and the default name of the first file is SAM_0001.
The file number increases one at a time from
t
SAM_0001 to SAM_9999. (1000 files can be
stored in one folder.)
The folder number increases one at a time from
t
100PHOTO to 999PHOTO.
The maximum number of files that can be stored in
t
one folder is 1000.
The camera defines file names according to the
t
Digital rule for Camera File system (DCF) standard.
If you change the names of files intentionally, the
camera may not play back the files.
* Default
* Default