Samsung HT-X200T-XAA - Manual (Page 12)

ENG
23 22
OPERA
TION
Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the HT-X200's Remote Control
1 Plug the main unit's power cord into the AC power supply.
2 Press the TV button to set the remote to TV mode.
3 Press the POWER button to turn on your Samsung TV
with this remote.
4 Press the TV/VIDEO button to select VIDEO mode on your TV.
5 Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6 Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD playback.
VIDEO
Disc Playback
1 Load a disc vertically into the Disc Insert Hole.
■ Insert a disc so that the label side faces forward.
■ Playback starts automatically.
2 To eject the disc, press the EJECT button.
• Depending on the content of the disc, the initial screen may appear different.
•
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system)
recommendations.
To stop playback, press the STOP button during playback.
■ If pressed once, is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
■ If pressed twice, is displayed, and if the PLAY/PAUSE ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the PLAY/PAUSE ( ) button during playback.
■ To resume playback, press the PLAY/PAUSE ( ) button again.
DVD CD
The DVD Home Theater's remote can be used to control Samsung TVs.
ALL