Samsung CW29M064N2XXEC - Manual (Page 22)

22
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Color Tone, Contrast, Brightness, Sharpness, Color, Tint
(NTSC only)
1 Press the MENU button.
Result: The Picture menu is displayed.
2 Press the œ or √ button.
3 Press the ▲ or ▼ button to select the Adjust, and then press the œ
or √ button.
Result: When select the Mode to Custom, the Adjust menu is
displayed.
4 To adjust the... Press the...
◆ Color Tone ◆ œ or √ button.
Result: You select the required option
(Normal, Warm1/2, Cool1/2).
◆ Contrast ◆ œ or √ button.
◆ Brightness Result: The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
➣
The Sharpness and Tint are not available in DVD mode.
5 When you are satisfied with the settings, press the EXIT ( ) button
or, press the MENU ( ) button repeatedly to return to normal
viewing.
➣
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “
”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing to Remove Color Patches” on page 36).
➣
If you make any changes to the Adjust settings, the picture
standard is automatically switched to Custom.
Picture
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Picture
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Picture
Mode œ œ Custom √
Adjust √
Digital NR : Off
Tilt : 0
Contrast 91