Samsung CW29M064N2XXEC - Manual (Page 12)

12
ENG
Plug & Play Feature (depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the “Language” menu is automatically
displayed.
2 Press the ▲ or ▼ button to select required language. Press the
MENU button to enter the language, and then the message Ant.
Input : Check
is displayed.
➣
If any language is not selected on the Language menu, the
“Language” menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to “Storing the
Channels Automatically” on page 14).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the Time menu is
displayed.
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the
▲ or ▼ button (refer to “Setting and
Displaying the Current Time” on page 30).
6 When you have finished, press the MENU ( ) button.
Result: The message ENJOY YOUR WATCHING is displayed, and
then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the Function, and then
press the œ or √ button.
3 Select the Plug & Play by pressing the ▲ or ▼ button, and
then press the œ or √ button.
Result: The message Plug & Play is displayed.
Function
Language : English
Time
√
Plug & Play √
Blue Screen : Off
Child Lock √
Demonstration √
Plug & Play
ENJOY YOUR WATCHING
Ant. Input Check
Time
Clock 11 : 35
P 1 C - - - - -
471 MHz 48 %
Language
English Português
Deusch Italiano
Français Sverige
Nederland Türkçe
Espanõl EÏÏËÓÈο