Samsung CW29M064N2XXEC - Manual (Page 14)

14
ENG
Storing the Channels Automatically (depending on the model)
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 20.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the Channel.
3 Press the œ or √ button to select the Auto Store.
4 Press the œ or √ button again.
Result: The Auto Store menu is displayed with the Country
selected.
5 Select your country by pressing the œ or √ button. The following
countries are available: Others - Belgie - Deutschland - España -
France
- Italia - Nederland - Sverige - Schweiz - UK.
6 Press the ▲ or ▼ button to select the Search and press the œ or √
button.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
7 When searching and storing is complete, the Sort menu is
displayed.
To... Then...
Sort the stored channels Go to Step 4 of the “Sorting
into the desired numerical order the Stored Channels”
procedure on page 20.
Exit the channel store function Press the MENU ( )
sorting the channels button without repeatedly
until the menus disappear.
➣
If sound does not work regularly after storing channels, select
the sound system which best corresponds in Manual Store
menu (refer to the opposite page).
Channel
Sort
From : P 1
To : P--
Store : ?
Channel
Auto Store √
Manual Store √
Name √
Add/Erase √
Fine Tune √
Sort √
Picture
Mode œ œ Custom √
Adjust √
Digital NR : Off
Tilt : 0
P 1
471 MHz 48 %
Channel
Auto Store
Country : UK
Search : -/+
Channel
Auto Store
Country : UK
Search : -/+