Samsung HTDL200PTH-XAA - Manual (Page 7)

11
Connecting the Speakers Connect Video to TV
• Connect the satellite speakers, center speaker, and
subwoofer to the terminals on the rear panel using speaker
cords supplied.
• Connect the white cord to the red (+) terminal, and the black
cord to the black (–) terminal respectively.
Subwoofer
Left front
speaker
Left rear
speaker Right rear
speaker
Right front
speaker
Center
speaker
Press and hold the terminal tab.
1
Insert the speaker cord. 2
Release your finger. 3
1 2 3
• for in-depth information about adjusting the delay time,
see “Speaker Settings” on page 34.
12
Right rear speaker
Right front speaker Left front speaker
Left rear speaker
Center speaker
Subwoofer
R-REAR-L WOOFER CENTER R-FRONT-L
IMPEDANCE
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
R-REAR-L WOOFER CENTER R-FRONT-L
IMPEDANCE
Composite
Video
Component
Video
S-Video
TV
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signals.