Samsung HT-WDC10-XAA - Manual (Page 2)

Display Function
GREEN LED ON Power on /Charging completed
RED LED ON Charging.
OPERATION STATUS OF THE CHARGING CRADLE'S LED
How to charge the Wireless Transmitter
1. Connect the Wireless Transmitter to the
Charging Cradle.
2. Connect the DC power adaptor to a
wall socket.
The charging indicator lights up
and charging starts.
After the battery is fully charged,
the charging indicator turns Green.
•
STANDB
Y
LINK
CHAR GE
Wireless Dock Cradle for iPod/iPhone
✴ The Wireless Transmitter can be only
charghed by the supplied adaptor.
✴ The indication is the charging state of the
built-in battery in iPod main Dock.
Check the charging state of iPod/iPhone by
checking the charging indication of its battery.
“Made for iPod,”
and “Made for
iPhone” mean that
an electronic
accessory has been designed to connect
specifi cally to iPod or iPhone, respectively, and
has been certifi ed by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with
iPod or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered
in the U.S. and other countries.
The volume control may not be operated
normally except at the referred models. If there
is any error happened at the models above,
please update the software of iPod/iPhone at
the lastest version.
▪
▪
▪
iPod/iPhone MODELS THAT CAN BE
USED WITH THIS PRODUCT
iPod touch
(1st, 2nd, 3rd, and
4th generation)
iPod classic iPod with video
iPod nano
(1st, 2nd, 3rd,
4th, 5th, and 6th
generation)
iPhone 4 iPhone 3GS
iPhone 3G iPhone