Samsung BD-C8000-XAA - Manual (Page 30)

30
English
Connections
Case 2 : Connecting to a TV with Audio/Video cables - Good Quality
Using Audio/Video cables, connect the AV OUT (yellow) terminals on the side of the player to the
VIDEO IN (yellow) / AUDIO IN (red and white) terminals of your TV.
Turn on the player and TV.
Press the input selector on your TV remote control until the “VIDEO” signal from the player appears
on the TV screen.
NOTE
If you want to view video on your TV only, close the display panel of your player. Playback will continue and audio to the
speakers will be cut off, but you still will be able to use the remote to control the player.
Noise may be generated if the audio cable is placed too close to the power cable.
The number and position of the jacks on your TV may vary depending on your TV set. Please refer to the user manual of
your TV.
CAUTION
Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
1.
2.
3.
✎
▪
▪
▪
!
▪
Audio/Video cable
White Yellow Red
Yellow
BD-C8000-XAA-ENG-1_0703.indd 30 BD-C8000-XAA-ENG-1_0703.indd 30 2010-07-03 11:47:14 2010-07-03 11:47:14