Samsung LS24F9NSM-ZA - Manual (Page 62)

3-6 Using the Product
3-6 Anynet+ (HDMI-CEC)
What is Anynet+?
is a function that enables you to control all connected Samsung devices that support with your Samsung
TV‘s remote. The system can be used only with Samsung devices that have the feature. To be sure your
Samsung device has this feature, check if there is an logo on it.
Connecting Anynet+ Devices
1. Connect the [HDMI (DVI) IN 1, 2] jack on the TV and the HDMI OUT jack of the corresponding device using an
HDMI cable.
2. Connect the [HDMI IN] jack of the home theater and the HDMI OUT jack of the corresponding device using an
HDMI cable.
• Connect the Optical cable between the [DIGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio
Input on the Home Theater.
• When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater‘s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio,
connect the [DIGITAL AUDIO OUT (OPTICAL)] jack on the DVD / Satellite Box ( i.e. Anynet Device 1 or 2) directly
to the Amplifier or Home Theater, not the TV.
• You can connect only one Home Theater.
• You can connect an device using the HDMI cable. Some HDMI cables may not support
functions.
• works when the AV device supporting is in the Standby or On status.
• supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type.