Samsung BD-EM59C-ZA - Manual (Page 20)

Settings
Audio
digital Output
Lets you select the digital audio output format that is
suitable for your TV or AV Receiver. For more details,
see the digital output selection table on page 51.
pCM downsampling
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are outputted to an
amplifier. Choose On if your amplifier or receiver is not
compatible with a 96Khz signal.
dynamic Range Control
Lets you apply dynamic range control to Dolby Digital,
Dolby Digital Plus, and Dolby True HD audio.
Auto : Automatically controls the dynamic range of
Dolby TrueHD audio, based on information in the
Dolby TrueHD soundtrack. Also turns dynamic range
control on for Dolby Digital and Dolby Digital Plus.
Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder and
the volume of loud sounds is reduced.
downmixing Mode
Lets you select the multi-channel downmix method that
is compatible with your stereo system. You can choose
to have the player downmix to normal stereo or to
surround compatible stereo.
Network
Network Settings
Configure the network connection so you can enjoy
various features such as Internet services or AllShare
Wi-Fi functionality, and perform software upgrades.
Network Status Lets you check the current network and Internet status.
Wi-Fi direct
Lets you connect a Wi-Fi Direct device to the player
using a peer-to-pear network, without the need for a
wireless router Note that if you set wireless network, it
may be disconnected while you're using Wi-Fi Direct.
|
20
English