Samsung LNT466FX-XAA - Manual (Page 65)

English -
1. Insert a USB drive containing the firmware upgrade into the WISELINK port on
the side of the TV.
2. Press the mEnU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the EnTER button.
3. Press the ▲ or ▼ button to select Software upgrade, then press the EnTER button.
4. Press the EnTER button.
The message "Scanning for USB... It may take up to 30 seconds." is displayed.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will shut off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete.
Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on located on the side of your TV.
SW Upgrade
Scanning for USb...
It may take up to 0 seconds.
Setup
▲ more
Film mode : Off ►
Wall-mount Adjustment ►
PIP ►
Function help : Off ►
SW Upgrade ►
TV
move Enter Return
TV Side Panel
USb Drive
BN68-01273A-Eng-0629.indd 63 2007-06-29 �� 4:52:06