Samsung SCX-4300-XAA - Manual (Page 27)

Loading original documents and paper
3.3
Paper size supported in each mode
Envelope
(continued) Envelope C6 114 x 162 mm
(4.48 x 6.37
inches)
60 to 90
g/m 2 (16 to
24 lb)
1 sheet of
paper for
the manual
feeder
Transparency Letter, A4 Refer to the Plain
paper section
138 to 148
g/m 2
1 sheet of
paper for
the manual
feeder
Labels Letter, Legal,
Folio, A4, JIS
B5, ISO B5,
Executive,
A5, A6
Refer to the Plain
paper section
120 to 150
g/m 2 (32 to
40 lb)
1 sheet of
paper for
the manual
feeder
Card stock Letter, Legal,
Folio, A4, JIS
B5, ISO B5,
Executive,
A5, A6
Refer to the Plain
paper section
60 to 165
g/m 2 (16 to
43 lb)
1 sheet of
paper for
the manual
feeder
Minimum size (custom) 76 x 127 mm
(3.0 x 5.0 inches)
60 to 165
g/m 2 (16 to
43 lb bond)
1 sheet of
paper for
the manual
feeder Maximum size (custom) 215.9 x 356 mm
(8.5 x 14 inches)
a If paper weight is over 90 g/m 2 , load one sheet of paper in the manual feeder.
b Maximum capacity may differ depending on media weight, thickness, and
environmental conditions.
Type Size Dimensions Weight a Capacity b
Mode Size Source
Copy mode Letter, A4, Legal, Folio,
Executive, ISO B5, JIS
B5, A5, A6
• paper input tray
• manual feeder
Single side printing All sizes supported by the
machine
• paper input tray
• manual feeder
Guidelines for selecting and storing
print materials
When selecting or loading paper, envelopes, or other print
materials, keep these guidelines in mind:
• Always use paper and other materials that conform with the
specifications listed on page 3.2.
• Attempting to print on damp, curled, wrinkled, or torn paper
can cause paper jams and poor print quality.
• For the best print quality, use only high quality copier grade
paper specifically recommended for use in laser printers.
• Avoid using the following paper types:
- Paper with embossed lettering, perforations, or a texture
that is too smooth or too rough
- Erasable bond paper
- Multi-paged paper
- Synthetic paper and thermally reactive paper
- Carbonless paper and Tracing paper.
• Use of these types of paper could result in paper jams,
chemical smells, and damage to your machine.
• Store paper in its ream wrapper until you are ready to use it.
Place cartons on pallets or shelves, not on the floor. Do not
place heavy objects on top of the paper, whether it is
packaged or unpackaged. Keep it away from moisture or
other conditions that can cause it to wrinkle or curl.
• Store unused materials at temperatures between 15 o C and
30 o C (59 o F to 86 o F). The relative humidity should be
between 10% and 70%.
• Store unused paper in a moisture-proof wrap, such as a
plastic container or bag, to prevent dust and moisture from
contaminating your paper.
• Load special paper types one sheet at a time through the
manual feeder to avoid paper jams.
• To prevent materials such as transparencies and label sheets
from sticking together, remove them as they print out.