Samsung LNP267WX-XAA - Manual (Page 18)

English-
12
I
N S TA L L AT I O N
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO jack on
the TV.
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
* Each external input source device has a different back panel configuration.
1
To begin, follow
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
2
Connect an audio cable
between the AUDIO
OUT jacks on the VCR
and the L-AUDIO-R
jacks on the TV.
Connecting a DVD/Set-top box via DVI
* Each external input source device has a different back panel configuration.
1
Connect a DVI-D
cable between the
DVI connector
on the TV
and the DVI connector
on the DVD player/
Set-top box.
2
Connect an audio
cable between the
L-AUDIO-R jack on the
TV and the
AUDIO OUT jacks
on the DVD player/
Set-top box.
BN68-00751A-00ENG.qxd 8/7/04 8:55 PM Page 12