Samsung HLR5677WX-XAA - Manual (Page 11)

Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH and CH buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify the type of
signal source that is connected to the TV (i.e., an antenna or cable system).
1
Press the MENU button. Press the … or
† button to select “Channel”, then press
the ENTER button.
2
Press the ENTER button to select
“Antenna”.
Press the … or † button to select “Air” or
“Cable”, then press the ENTER button.
3
Press the … or † button to select “Auto
Program”, then press the ENTER button.
Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Cable √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
●
All available DTV and analog
channels are automatically stored
in memory.
English-11
Channel
Antenna : Cable
Auto Program
Add/Delete
Favorite Channels
Name
Fine Tune
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Air
Cable
BP68-00461A-00Eng_1206 12/6/04 12:39 PM Page 11