Samsung LS23A950DS-ZA - Manual (Page 59)

59
Setup and Reset
7
7 Setup and Reset
6 The selected option will be applied.
z
This menu is not available when Bright is in Dynamic Contrast mode.
z
This menu is not available when Eco Light Sensor is enabled.
7.1.4 Eco Icon Display
Configuring the Eco Icon Display Settings
1 Press [ ] on the product.
2
Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to ECO and press [ ] on the product.
4
Press [ ] to move to Eco Icon Display and press [ ] on the product. The following screen will
appear.
z
Off : Deactivate the Eco Saving function.
z
On : Display the operation status of the Eco sensor as a pop-up guide.
5 Press [ ] to move to the option you want and press the [ ].
6
The selected option will be applied.
z
The Eco Motion Sensor will activate power-saving mode if it is set to on and does not detect
any movement for a specified time.
z
A 10-second countdown timer will start along with the above picture before the power-saving
mode activates showing the operation status of the Eco Motion Sensor .
z
If the screen brightness is adjusted according to the ambient light intensity when the Eco Light
Sensor is on, a pop-up as shown above will appear showing the adjusting screen brightness.
m
Return Enter Move
ECO
Eco Motion Sensor
೛Backlight
Eco Light Sensor
೛Sensitivity
೛Brightness Level
Eco Saving
Eco Icon Display
5 Min
Dimming
On
High
Brighter
Off
On