Samsung HT-BD1200T-XAA - Manual (Page 41)

41
ENG
●
AUDIO SETUP
Setting the Sound Edit
Press the ▲▼ buttons to select Sound Edit,
then press the ENTER or ► button.
Press the ▲▼ buttons to select the desired Speaker,
then press the ◄► button to adjust the settings.
When done, use the ▲▼◄► buttons to select Save,
then press the ENTER button.
If you don’t want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
Press the RETURN butt on to return to the previous menu.
Adjusting Front/Surround Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Surround/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to
6dB.
• The sound gets louder as you move closer to +6dB and
quieter as you get closer to -6dB.
DSP(Smart Sound) Function
This will regulate and stabilize the volume level against a
drastic volume change when changing channels or during a
scene transition.
Press the DSP button.
Each time the button is pressed, the selection changes as
follows:
S.SOUND ON
¨
S.SOUND OFF
4.
5.
6.
M

•
Setup
AV Sync : 50msec
Test Tone
Speaker Distance
Sound Edit ►
System Setup
Language Setup
Audio Setup ◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
DVD DVD
Setup
AV Sync : 50msec
Test Tone
Speaker Distance
Sound Edit ►
System Setup
Language Setup
Audio Setup ◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
DVD DVD
Speaker Edit
Save Cancel
RETURN ADJUST MOVE ▲ ▼ ▲ ▼
HT-BD1200_XAA_0616-2.indd 41 HT-BD1200_XAA_0616-2.indd 41 2009-06-16 1:46:11 2009-06-16 1:46:11