Samsung DVD-V1000V-XAA - Manual (Page 18)

GB
35
GB
34
Changing the Rating Control Password
Follow these instructions to change the Rating Control password.
1 Select “Changing Password”
Use the up/down to select “Changing Password” from the “Rating
Control” menu.
2 Enter New Password
Enter a new 4-digit password using the 0–9 buttons on the remote
control.
3 Re-enter Password
Enter the same 4-digit password using the 0–9 buttons on the
remote control to confirm your password.
4 Confirm New Password
After you re-enter the password, a menu will appear to indicate
whether or not the password has been successfully changed.
Press the RETURN button to continue.
• Press the RETURN button repeatedly to exit the menu system.
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
Before You Begin...
• If your A/V receiver IS equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the Digital Audio Out connection below.
1 Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the Digital Audio Out jacks on the back panel of the DVD-VCR to
their corresponding Digital Audio Input jacks on your A/V Receiver:
• Optical Use whichever connection is available
• Coaxial on your A/V Receiver.
A/V Receiver Connections
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
OR
RATING CONTROL
Enter New Password
----
Use 0-9 Keys
RETURN To Go Back
CHANGE PASSWORD
Enter New Password
----
Use 0-9 Keys
RETURN To Go Back
CHANGE PASSWORD
Re-Enter Password
----
Use 0-9 Keys
RETURN To Go Back
CHANGE PASSWORD
PASSWORD NOT CHANGED
RETURN To Continue
CHANGE PASSWORD
PASSWORD HAS
BEEN CHANGED
RETURN To Continue
01547A DVD-V1000/XAA-Eng2 5/16/02 3:38 PM Page 34