Samsung DVD-V9800-XAA - Manual (Page 71)

ENG- 71
V C R O P E R AT I O N S
6
Select the source from which
you wish to record by pressing:
- The CH or button for
television channel.
- The INPUT SEL. button for
the LINE1 or LINE2 input
source.
7
Press the REC button to start
recording. When you have
finished recording, press the
(Stop) button.
Selecting the Audio Output Mode
Y ou can select the mode in which the sound is reproduced on the loudspeakers and AV outputs.
The following options are available.
Audio output Mode
- Left : Used to listen to the sound on the left Hi-Fi channel.
- Right: Used to listen to the sound on the right Hi-Fi channel.
- Mono: Used to listen to the sound on the normal mono channel.
- Hi-Fi : Used to listen to Hi-Fi stereo sound on the left and
right channels. When playing back tapes recorded in
Hi-Fi, the sound switches to Hi-Fi after five seconds of
Mono.
Press the AUDIO button on the
remote control until the
required option is displayed.
00000X_V9800_XAA_Eng3 1/23/08 3:59 PM Page 71