Samsung DVD-V9800-XAA - Manual (Page 19)

ENG- 19
C O N N E C T I O N S
Connection to an Audio System
Connecting to an Audio System (2 Channel Amplifier, Analog)
1
Using the audio cables, connect the (LINE)
AUDIO (red and white) OUT jacks on the rear of
the DVD-VCR to the AUDIO (red and white) IN
jacks of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO or COMPONENT
OUT jacks on the rear
of the DVD-VCR to the VIDEO or COMPONENT
IN jack of your TV as described on pages 14 to
18.
3
T urn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select the External input in order to hear sound
from the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53)
- The position of jacks may vary depending on the Amplifier.
Please refer to your Amplifier's user manual .
- You can also connect the amplifier using the AUDIO OUT (red and white) jacks from the DVD-VCR.
Red
Audio Cable
White
Red
2-channel
Stereo Amp.
White
00000X_V9800_XAA_Eng1 2/22/08 3:57 PM Page 19