Samsung BD-C6900-XAA - Manual (Page 30)

0
English
Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the player.
(When the player is connected to TV for the
first time, the player will turn on automatically
and display the Initial Settings screen.)
Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
Press the ENTER button to select Start.
Press the ▲▼ buttons to select the desired
TV aspect ratio, then press the ENTER
button. (See page 33)
1.
2.
3.
4.
Press the ◄► buttons to select the desired
Network Settings : Wired, Wireless or PBC
(WPS), and then press the ENTER button.
If you do not know your Network Settings,
press the BLUE (D) button on your remote
instead to skip Network Settings here, finish
the Initial Settings, and go to the Home menu.
If you selected a Network Setting, go to
pages 39~43 for more information about the
Network settings. When done, go to Step 6.
Press the OK button.
The Home menu is displayed. For more
information about the Home menu, please
see page 31.
Home Menu
NOTE
When the player is connected to a TV for the first
time, player will turn on automatically.
This is not malfunction.
The Home menu will not appear if you do not
configure the initial settings except as noted below.
If you press the BLUE (D) button during the network
setup, you can access the Home menu even if the
network setup is not completed yet.
When you return to the Home menu, the full screen
mode is cancelled automatically.
If you want to display the Initial Setting screen again
to make changes, press the STOP ( ) button on
the front panel of the player for more than 5 seconds
with no disc inserted.
5.
6.
•
✎
▪
▪
▪
▪
▪
internet radio
You Tube
No Disc a Change Device d View Devices " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
a Previous " Select
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
> Move " Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Svenska
a Previous d Skip < Move " Select
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network connection using Ethernet cable. Please make sure that the
Ethernet cable is connected.
Wired Wireless PBC (WPS)