Samsung DVD-TR520-XAA - Manual (Page 24)

24 - English
C
onnecting & Setting up
■ After the current time is set automatically,
the TWIN TRAY DVD RECORDER will
perform Auto Channel Memory for about
3 minutes. If power is on, while Auto
Channel Memory is in process, Auto
Channel Memory will stop. In this case,
do Auto Channel Memory from MENU
(See page 29).
NOTE
■ The input setting will automatically
change to DV when the camcorder is
connected and powered on.
NOTE
Method 2 : Connecting a
Camcorder to the AV 2 IN jacks
You can also use the AV 2 IN jacks on the front panel of
the TWIN TRAY DVD RECORDER. You can record
from connected equipment, such as a camcorder.
When an input source (such as a camcorder) is inserted
into AV 2 IN while viewing TV, the input will be switched
to AV 2 IN automatically. If the input is not selected
automatically, press the INPUT button to select proper
input.
Method 3 : Connecting a
Camcorder to the DV IN jack
If your camcorder has a DV output jack, connect it to the
DV input jack of your TWIN TRAY DVD RECORDER.
Step 5 : Connecting the
Power Cord
After all connections are complete, plug the power cord
in the wall outlet.
“Auto” appears in the panel display. This means
that the current time is being set automatically
(Auto Program) through the antenna under
connection and also the channel is being set.
The setup may take a few minutes.
When the TWIN TRAY DVD RECORDER operates
normally, the current time is automatically set and
displayed in the front panel display.
00627D-DVD-TR520_XAA_17-24 2005.7.26 10:1 AM Page 24