Using burst modes, Capturing photos in the high-speed burst mode, Capturing photos in the high-speed – Samsung EC-EX2FZZBPBUS User Manual
Page 88: Burst mode ……………………………… 87
Shooting options
87
Using burst modes
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
Also, it can be difficult to adjust the exposure correctly and select a proper light source. In these cases, select one of the burst modes.
p A h M
Icon
Description
Continuous (5 fps): Capture 5 photos per second
continuously. (You can capture up to 10 photos in one
burst.)
Continuous (10 fps): Capture 10 photos per second
continuously. (You can capture up to 10 photos in one
burst.)
2
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
Press and hold [Shutter].
•
While you are pressing [Shutter], the camera captures photos
continuously.
•
You cannot use the flash, Smart Zoom, Face Detection options, and
Smart Filter options when the drive mode dial is set to Continuous,
Precapture, or Bracket.
•
It may take longer to save the photos depending on the memory card
capacity and performance.
•
The camera always displays captured photos before returning to
Shooting mode.
Capturing photos in the High-speed burst
mode
1
Rotate the drive mode dial.
Icon
Description
Single: Capture a single photo. Single is not a
high-speed burst option.
Continuous (3 fps): Capture 3 photos per second
continuously. (You can capture up to 10 photos in one
burst.)