beautypg.com

Setting the delay time – Samsung HT-P40TH-XAA User Manual

Page 25

background image

47

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.

2

1

In Stop mode,
press MENU
button.

Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.

With (Dolby Pro Logic II), the delay time may be different for each mode.

With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

The Center channel is only adjustable on 5.1 channel discs.

Note

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of
the audio signals from the center and rear speakers.

Setting the Delay Time

GB

48

Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER

Ideal CENTER
SPEAKER placement

It is desirable to place all speakers within this circle.

Ideal
SURROUND
SPEAKER
placement

SETUP

You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.

4

3

5

Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.

Press Cursor , ,

, buttons to move

to the desired speaker
and then press
ENTER button.

Press Cursor ,
to set the Delay
time.

0 ms
3 ms
6 ms
9 ms

12 ms
15 ms

Setting REAR (SURROUND) SPEAKERS

If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.

Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.

Distance between Df and Dc

Delay Time

Delay Time

0 ms
1 ms
2 ms
3 ms
4 ms
5 ms

Distance between Df and Ds

0.00 m
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m

0.00 m
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m

This manual is related to the following products: