Samsung LTN325WX-XAA - Manual (Page 78)

English-
70
A
P P E N D I X
How to Install the Wall Bracket
Wall bracket Main body bracket Screws
List of Contents
1 Wall bracket plate
2 Assembly hinges
(Make sure they are a left
/right pair.)
1 Bracket bar
2 Brackets
(Left and Right)
(The two brackets
are interchangeable.)
Plastic screw anchors: 4
Screws: 8
Screws: 4
How to Adjust the Angle of the Bracket
Note: Please adjust the angle of the bracket to 0 degrees before you fix it to the wall.
Captive screws
Make sure you put the right
hinge to the right side of the
bracket and vice versa.
Be aware of the correct installation direction of
the bracket when you set the angle to 30 and
32 degrees. (The direction for 30 and 32
degrees is indicated on the bracket surface.)
When you first open the box, the bracket is not
assembled.
Put the left and right brackets in the direction of
the arrow and tighten the captive screws. 1. Attach the LCD TV onto the wall bracket.
(Follow the instructions below.)
2. Pull the upper part of the LCD TV fixed to the
bracket forward in the direction of the arrow and
adjust the angle.
3. You can adjust the angle to your liking
between 0°~20°(±2°).
venus-07-en 6/28/03 8:18 AM Page 70