Samsung LTN325WX-XAA - Manual (Page 69)

English-
61
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If
the noise is not removed by fine tuning alone, then do the frequency adjustments to the
utmost and fine tune again. After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen.
Press the PC button on the remote control to select the PC mode.
1
Press the MENU button to
display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
3
Press the
UP/DOWN
buttons
to select “Coarse” or
“Fine”.
4
Press the
LEFT/RIGHT
buttons to adjust the
screen quality, vertical
stripes appear or the
picture may be blurry.
5
When you are satisfied with the settings, press the
MENU button repeatedly to return to normal viewing.
P C D I S P L AY
2
Press the UP/DOWN
buttons to select “PC Setup”,
then press the ENTER
button.
Press the ENTER button
to select “Image Lock”.
venus-05-en 6/28/03 8:17 AM Page 61