Samsung EC-L100ZSBA-US - Manual (Page 96)

95
Images are too bright
Exposure is excessive
oReset exposure compensation
No image on external monitor
The external monitor has not been connected properly with
the camera
oCheck the connection cables
There are incorrect fi les in the memory card
oInsert a memory card that has correct fi les
When using the PC’s explorer, the [Removable Disk] fi le does not show
Cable connection is incorrect
oCheck the connection
The camera is off
oTurn the camera on
The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac
OS 10.0 - 10.4. Alternatively the PC does not support USB
o Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.0 - 10.4 to PC
that supports USB
The camera driver is not installed
oInstall a [USB Storage Driver]
x
x
x
x
x
x
x
The fl ash does not fi re
Flash off mode has been selected
oDis-engage fl ash off mode
The camera mode can’t use the fl ash
oRefer to the FLASH instruction (p.30)
Incorrect date and time is displayed
The date and time have been set incorrectly or the camera has adopted
the default settings
oReset the date and time correctly
The camera buttons do not operate
Camera malfunction
oRemove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
Incorrect memory card format
oRe-format the memory card
The images don’t play back
Incorrect fi le name (Violation of DCF format)
oDo not change the image fi le name
Colour of image is different to the original scene
White balance or effect setting is incorrect
oSelect appropriate White balance and effect
x
x
x
x
x
x
x
Before contacting a service centre