Samsung EC-L100ZSBA-US - Manual (Page 82)

81
Starting PC mode
If you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to “computer connection mode”.
In this mode, you can download stored images to your PC through the USB
cable.
Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with the
supplied USB cable.
3. Turn on the computer. The camera and
computer are connected.
4. External device selection menu will be
displayed on the LCD monitor.
5. Select the [Computer] by pressing the Up /
Down button and press the OK button.
„
Connecting the camera to a PC „
K If you selected [Printer] in Step 5, when you connect the camera to
your computer, the [Connecting Printer] message will display and the
connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure
from Step 2 and onward.
Disconnecting the camera and PC
Refer to page 83 (Removing the removable disk).
„
Charging LED
Select USB
Computer
Printer
Confirm