Samsung RS25H5000SR-AA - Manual (Page 19)

English - 19
02
OPERA
TING
USING THE CONTROL PANEL
Freezer/Fridge
(Temperature adjustment)
Press the Freezer or Fridge button until the desired
temperature is set.
Each time you press the Freezer or Fridge button,
temperature indicator will change in below order.
• Freezer
0 °F → -1 °F → -2 °F → -3 °F → -4 °F → -5 °F →
-6 °F → -7 °F → -8 °F → 5 °F → 4 °F → 3 °F →
2 °F → 1 °F → 0 °F
(-18 °C → -19 °C → -20 °C → -21 °C → -22 °C →
-23 °C → -15 °C → -16 °C → -17 °C → -18 °C)
❈ In Some Place Starts -19 °C.
• Fridge
37 °F → 36 °F → 35 °F → 34 °F → 44 °F → 43 °F
→
42 °F → 41 °F → 40 °F → 39 °F → 38 °F →
37 °F
(3 °C → 2 °C → 1 °C → 7 °C → 6 °C → 5 °C →
4 °C → 3 °C)
Power Freeze
This icon will light up when you activate the Power
Freeze function.
Power Freeze function generates cool air for
50 hours continuously and it makes the inside of
the refrigerator cool faster.
This function is useful when you make ice more
quickly.
When you have enough, just press and hold the
Freezer/Power Freeze (3 sec) button again for 3
seconds to cancel the Power Freeze function.
When you use this function the energy
consumption of the refrigerator may
increase.
Remember to turn it off when you do
not need it and return the freezer to your
original temperature setting.
Energy Saver
This icon will light up when you activate the Energy
Saver function.
The Energy Saver function is automatically set to
“ON” when power is supplied to the Refrigerator.
If condensation occurs on the doors, turn the
Energy Saver function off.
In some places, water drop may be
generated on the door part.
In this case, it is recommended to turn off
the Energy saver function.
Lighting
This icon will light up when you activate the
Lighting function. In this case, the dispenser light
(under the display) will be on constantly.
If you would like the dispenser light to come on
only when using the dispenser, turn the Lighting
function off by pressing the Lighting button.
Control Lock
This icon will light up when you activate the Lock
function.
In this case, you will not be able to use the control
panel.
If you press and hold the Lighting/Control Lock
(3 sec) button again for 3 seconds, you will be able
to use the control panel again.
Filter Indicator
When the filter indicator light changes to red, it is
time to change the filter.
Typically this happens about every 6 months.
The filter Indicator will be Off when you initially
insert the water filter.
The filter Indicator will be red when you have used
your water filter for 6 months.
SSEDA-14 (RS25H5121) ���.indd 19 2013. 11. 28. �� 11:28