Samsung LT24C550ND-ZA - Manual (Page 28)

28
English
Basic Features
Setup Menu
¦ Setting the Time
MENU m → Setup → Time → ENTER E
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, am/pm
and am/pm manually.
✎
Available only when Clock Mode is set to
Manual.
✎
You can set the Month, Day, Year, Hour and am/
pm directly by pressing the number buttons on
the remote control.
Time Zone: Select your time zone.
✎
This function is only available when the Clock
Mode is set to Auto.
DST (Off / On / Auto): Switches the Daylight Saving
Time function on or off.
✎
This function is only available when the Clock
Mode is set to Auto.
¦ Using the Sleep Timer
MENU m → Setup → Time → Sleep Timer → ENTER E
■ Sleep Timer
t
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎
To cancel the Sleep Timer, select Off.
¦ Setting the On/Off Timer
MENU m → Setup → Time → Timer 1 → ENTER E
You can set the TV to turn on automatically at a preset time.
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Timer 1
L Move U Adjust E Enter R Return
On Timer
Off Timer
Volume Content
Repeat
Sun Mon Tue Wed Thu Fri Sat
12 00 am Inactivate
12 00 am Inactivate
10 TV Air 3
Once
u
d
On Timer / Off Timer: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Content: Select a content to be played when the TV
is turned on automatically. (USB can be selected only
when a USB device is connected to the TV.)
– TV / USB: Select TV or USB. (Make sure that an USB
device is connected to your TV.)
– Antenna: You can view an antenna source.
– Channel: Select the desired channel.
– Music: Select the folder containing MP3 files on the
USB device.
– Photo: Select the folder containing JPEG files on the
USB device.