Samsung HW-HM45-ZA - Manual (Page 10)

REMOTE CONTROL
10
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the
Bluetooth POWER on function on and off.
See pages 19 and 20 for details.
3D SOUND (3D Sound Plus)
Press the 3D SOUND button on the remote to add depth and
spaciousness to the sound.
Press the 3D SOUND on the remote control.
Each time the button is pressed, the selection changes as follows :
3D SOUND PLUS OFF  3D SOUND PLUS MUSIC 
3D SOUND PLUS MOVIE
VOLUME
Adjusts the volume level of the unit.
POWER
Turns the Soundbar on and off.
SOUND EFFECT
You can select from 5 different sound modes - MUSIC, VOICE,
SPORTS, CINEMA, and STANDARD - depending on the type of sources
you want to enjoy.
Press the SOUND EFFECT button on the remote control.
Select the STANDARD mode if you want to enjoy the original sound.
Press the SOUND EFFECT button for more than 5 seconds to turn on
or off Smart Volume.
* Smart Volume
This will regulate and stabilize the volume level against a drastic
volume change caused by a channel change or scene transition.
Play/Pause
Press the ► button to pause playing the file temporarily.
Press the ► button again to play the selected file.
Skip Back
If there is more than one file on the device you are playing, and you
press the # button, the previous file is selected.
+ Installing the Battery in the Remote Control
1. Use a suitable coin to turn the
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the '●' marks side
by side as shown in the figure above.
3. Use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix
it in place.