Samsung SPH-M260ZKABST - Manual (Page 25)

18 2A. Phone Basics
Ⅲ 2-Sec Pause: Enter a seven-digit or ten-digit
number (phone number and area code) and
press
OPTIONS (right softkey) > 2-Sec Pause. This
inserts a longer pause between the dialed phone
number and the next entered digits.
Answering Calls
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call. (Depending
on your settings, you may also answer incoming
calls by opening the phone or by pressing any
number key. See “Call Answer Mode” on page 35
for more information.)
Your phone notifies you of incoming calls in the
following ways:
ⅷ The phone rings or vibrates.
ⅷ The backlight illuminates.
ⅷ The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. You may also
see the caller’s phone number, if available.
If you set CALL ANSWER to Talk Key , you also see the
following options. To select an option, press the
corresponding softkey.
ⅷ SILENT (left softkey) to mute the ringtone.
ⅷ IGNORE (right softkey).
Ending a Call
ᮣ Close the phone or press .
Missed Call Notification
When you do not answer an incoming call, your screen
displays the Missed Call log.
To display the Missed Call entry from the notification
screen:
ᮣ Highlight the entry and press . (To dial the
phone number, press .)
Note: Use this feature to navigate through automated menus.
If you know the number sequence required to connect
you to the right destination and the menu prompts
require more time to accept your number choice, enter
a
2-Sec Pause between each number. A 2-Sec
Pause entry displays a “t”.
Example: (214) 555-7777t5t6t7