Samsung RFG295AAWP-XAA - Manual (Page 17)

Setting Up _17
01
s
E
ttin
G
u
P
aDJustinG tHE FREEzER DRawER LEVEL
1. Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the four Phillips screws ( 2 ) slightly to loosen the door.
2. Loosen the controller screw( 3 ) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
After adjustment, first tighten screw( 3 ) and then screw( 2 ) .
1 2
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to -2.0 to reduce the door slope.
Slope
Reference
plane
Freezer Drawer
Adjustment part