Samsung DP515A2G-K01US - Manual (Page 85)

84
Chapter 3.
Using the computer
Installing the TPM program
You can install the TPM program as follows. Install the program
according to the procedures below.
This program is only provided for models with Recovery and
the TPM function.
1
Turn the computer on and immediately press the F4 key
several times.
2
After a moment, the Recovery program runs.
Click System Software.
3
When a pop-up window appears to ask you to reboot the
system, click Yes.
The system starts to reboot. After a moment, the SW Update
program automatically runs.
4
Connect to the network.
5
Select TPM Host SW and click Install.
6
After the program is completely installed, click Close.
7
Close the SW Update window and reboot your computer
again.
Registering the TPM program
1
On the Start screen, click the bottom-left icon ,
and then click Infineon Security Platform Solution >
Security Platform Managment > User Settings. (Run as
administrator)
Alternatively, double-click the
icon on the Taskbar and
run initialization with administrator authority.
Using the TPM Security Device
(Optional)