When the bearer is set to gprs, When the bearer is set to gsm, Key and enter your own choice – Samsung SGH-X506HBAGEN User Manual
Page 155: Port — enter a port number or use default setting, Dns2 — enter the secondary dns address, Dial number — enter the ppp server phone number, Login id — enter the ppp server login id, Password — enter the ppp server password
Section 13: Internet
151
Browser Profiles
Section 13
ⅷ
Home URL — set the address of your startup home page.
When the default home page displays, you can delete it using
the
key and enter your own choice.
ⅷ
Proxy — place a check in the box to use the proxy server.
ⅷ
IP Address — enter the IP address of the proxy server.
ⅷ
Port — enter a port number or use default setting.
ⅷ
DNS
מ
DNS1 — enter the primary DNS (Domain Name System)
address.
מ
DNS2 — enter the secondary DNS address.
ⅷ
Bearer — select the bearer to be used for each type of
network address accessed: GPRS or GSM. The remaining
options depend on the Bearer setting.
When the bearer is set to GPRS:
ⅷ
APN — enter the access point name used for the address of
the GPRS network gateway.
ⅷ
Login ID — enter the User ID required to connect to the GPRS
network.
ⅷ
Password — enter the password required to connect to the
GPRS network.
When the bearer is set to GSM:
ⅷ
Dial Number — enter the PPP server phone number
ⅷ
Login ID — enter the PPP server login ID.
ⅷ
Password — enter the PPP server password.
ⅷ
Data Call Type — select a data call type: Analog or ISDN.
Note: The Browser Profile settings may vary depending on the service
provider.