Samsung YP-T5H-XTL - Manual (Page 8)

15 14
Connect a USB cable to the USB port on the
computer.
Connect the other end of a USB cable to the USB cable
connection port on the bottom of the yepp, and press
the
button on the main unit.
● If you disconnect the USB cable from your PC while
implementing a command or initializing during USB
driver installation, your PC may not function correctly.
4
Upon installation of the USB driver
"SAMSUNG YP-T5" will appear in the
[System Properties] → [Device Manager].
6
3
The USB driver is installed with a message saying that
it is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
5
How to check the USB driver
● Windows 98:
Control Panel → System → Device Manager →
Universal Serial Bus controllers/Samsung YP-T5 Class
● Windows 2000/ME:
Control Panel → System → Hardware →
Device Manager → Universal Serial Bus controllers →
USB Mass Storage Device
● Windows XP:
Control Pane → System → Hardware → Device Manage →
Universal Serial Bus controllers → USB Mass Storage Device
When the USB driver is not installed automatically,
refer to the next page.
7
Connecting the yepp to a PC with a USB cable
Connecting the yepp to a PC
USB connect cable