Samsung BD-C6500-XAA - Manual (Page 30)

0
English
Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the player.
(When the player is connected to TV for the
first time, player will turn on automatically and
the Initial Settings screen will be displayed.)
Press the ▲▼ buttons to select desired
language, then press the ENTER button.
Press the ENTER button to select Start
button.
Press the ▲▼ buttons to select the desired
TV Aspect ratio, then press the ENTER
button. (See page 32)
1.
2.
3.
4.
Press the ◄► buttons to the select the
desired Network Settings: Wired, Wireless or
PBC (WPS), then press the ENTER button.
(See pages 39~42)
The Network Test will start and Initial Settings
will be completed.
Press the OK button.
The home menu will be displayed. (For more
information about home menu, please see
page 31)
Home Menu
NOTE
When the player is connected to TV for the first time,
player will turn on automatically.
Do not confuse because this is not malfunction.
The home menu will not be displayed if you do not
configure the initial settings.
If you press the BLUE(D) button during the network
setup, you can access the home menu even if the
network setup is not completed yet.
When you return to home menu, the full screen
mode will be cancelled automatically.
If you want to display Initial Setting screen again
in order to make changes, press the STOP ( )
button on the front panel of the player for more than
5 seconds with no disc inserted.
Use the HDMI cable to connect the player to an
Anynet+(HDMI-CEC)-compliant Samsung TV.
If the TV uses a language supported by the player,
that language will be set to a preferred language
automatically.
However, the Anynet+(HDMI-CEC) feature should
be set to On in both TV and the player.
5.
6.
•
✎
▪
▪
▪
▪
▪
▪
> Move " Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
a Previous " Select
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
a Previous d Skip < Move " Select
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network connection using the Ethernet cable.
Please make sure that the Ethernet cable is connected.
Wired Wireless PBC (WPS)
internet radio
You Tube
No Disc a Change Device d View Devices " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.