Removing the freezer accessories, Tempered glass shelves, Vegetable & fruit drawers – Samsung RFG298HDRS-XAA User Manual
Page 18: Cool select pantry, Using the doors, Using the tilting pocket, Tilting pocket
18_
Operating
1
2. Tempered Glass shelves
To remove - Tilt up the front of the shelf in the
direction shown (
1 ) and lift it up vertically ( 2 ). Pull the
shelf out.
To relocate - Tilt the front of the shelf up and guide
the shelf hooks into the slots at a desired height. Then
lower the front of the shelf so that the hooks can drop
into the slots.
The Tempered Glass shelves are heavy.
Use special care when removing them.
3. Vegetable & Fruit Drawers
To remove - Pull the drawer out to full extension.
Tilt up the front of the drawer and pull straight out.
To relocate - Insert the drawer into the frame rails and
push back into place.
The drawers need to be removed before the
glass shelf above them can be lifted out.
4. Cool Select Pantry
PLUS
To remove the pantry-
Pull the pantry out to full
extension. Tilt up the front
side of the pantry and pull
straight out.
To relocate the pantry -
Push the rails to the back of the refrigerator.
Place the drawer onto the rails and slide the pantry
back until it is in place.
To remove the divider -
Pull the pantry completely out to full extension and
raise the front side of the divider to unhook it from the
rear wall of the pantry, then lift the divider out.
To relocate the divider -
Hook the back of the divider over the rear wall of the
pantry and push the divider down.
Using the doors
Ensure that the doors close all the way and are
securely sealed.
When the refrigerator door is only partially open, it will
automatically close. But, the door will stay open when
opened more than the auto close range and you must
close it manually.
Using the tilting pocket
You can use the Tilting Pocket to store frozen pizza
and similar items up to 16" in diameter.
REMOVING THE FREEZER
ACCESSORIES
1. Tilting Pocket
To remove - Pull both brackets ( 1 ) upward until you
hear a clicking sound and remove the pocket.
To replace - Hook the ends of the pocket into both
brackets (
2 ) and push down until it locks into place.
CAUTION
CAUTION
1
2
DA68-02488A-11.indb 18
14. 5. 14. �� 11:45