beautypg.com

Installing the water line, Connecting to the water supply line – Samsung RF4287HAPN-XAA User Manual

Page 11

background image

setting up

_11

01 SETTING

UP

Connecting to the water supply line

1. First, shut off the main water

supply.

2. Locate the nearest cold water drinking line and

install the pipe clamp and shut off valve.

3. Connect the water line installation kit to shut off

valve.

INSTALLING THE WATER LINE

Connecting the water supply line to the
refrigerator.

There are several items that you need to purchase to
complete this connection.
You may fi nd these items sold as a kit at your local
hardware store.

Use Copper Tubing

Use Plastic Tubing

• ¼” copper tubing
• ¼” compression nut (1pc)
• Ferrule (2pc)

• ¼” plastic tubing

→ Molded end(Bulb)

• ¼” compression nut (1pc)

1. Connect the household water line to the

assembled compression fi tting.

-

If you are using copper tubing, slip the
compression nut ( B ) (not supplied) and ferrule
(not supplied) on copper tubing (not supplied) as
shown.

-

If you are using plastic tubing ( B ) , insert the
molded end (Bulb) of the plastic tubing ( B ) into
the compression fi tting.

Do not use without the molded end(Bulb) of
the plastic tubing ( B ).

2. Tighten the compression nut ( B ) onto the

compression fi tting.
Do not over-tighten the compression nut ( B ) .

3. Turn water on and check for any leakage. If you

fi nd water drops or leakage in the connection
areas, turn off the main water supply. Check the
connections and, if nescessary, tighten.

4. Flush 1 gallon of water through the fi lter before

drinking or using the water from the refrigerator.
(Flush approximately 6 minutes.) To fl ush, press
a large glass or cup against the water dispenser
lever. Fill the glass, empty it into the kitchen sink
after it is fi lled, and then repeat.

Pipe clamp

Pipe clamp

Cold water line

Cold water line

Shut off valve

Shut off valve

Shut off valve

Shut off valve

Pipe clamp

Pipe clamp

Cold water line

Cold water line

Water line installation kit

Water line installation kit

Plastic tubing

Plastic tubing

(Assembled)

(Assembled)

Ferrule (Not

Ferrule (Not

supplied)

supplied)

Compression nut

Compression nut
(1/4”) (Assembled)

(1/4”) (Assembled)

Compression

Compression
fi tting

fi tting
(Assembled)

(Assembled)

Molded

Molded
end(Bulb)

end(Bulb)

Compression nut

Compression nut
(B) (1/4”) (Not

(B) (1/4”) (Not
supplied)

supplied)

or

Copper tubing

Copper tubing

(Not supplied)

(Not supplied)

Plastic tubing (B)

Plastic tubing (B)
(Not supplied)

(Not supplied)

Household water supply line

Refrigerator

CAUTION

DA68-01922A.indb 11

DA68-01922A.indb 11

2013.3.4 1:32:45 PM

2013.3.4 1:32:45 PM

This manual is related to the following products: