Connecting an external display device – Samsung NP270E5E-K01US User Manual
Page 45
44
Chapter 2.
Using the computer
External
Monitor
TV
Projector
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
Change your TV to external device mode when connecting to
the TV.
3
Press the
+
key combination once. Then the
setting screen appears where you can select the monitor
mode.
Since pressing the
key while holding down the
key
changes the selection, select a display device.
LCD
CRT
LCD+CRT Clone
LCD+CRT Dual View
If the screen is not switched even if you press the
•
+
key combination, you have to install the Easy
Settings program.
Alternatively, to set up dual view:
•
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fit to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
Connecting an External Display Device