Samsung UN46ES6100GXZE - Manual (Page 16)

English - 16
Configuring the Basic Settings in Initial Setup
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the P button to
turn on the TV.
✎ Setup is available only when the input source is set to TV. See "Changing the Input Source" (page 20).
✎ To return to the previous step in the Setup sequence, select Previous.
✎ If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna
or cable connection before you turn on the TV. See page 7 for instructions.
✎ If you want to configure a wired network connection during Setup, make sure you've connected
a LAN cable to your TV. See pages 13 for instructions. If you want to configure a wireless network
connection during Setup, make sure your wireless modem or router is on and working.
1
Menu Language:
Select a Language. After you press the P button, the Start screen appears. Select Next to
continue. The Menu Language screen appears. Select the menu language
you want using your remote, and then select Next. The TV will display on-
screen menus using the language you select beginning with the next step
in the Setup process.
2
Use Mode:
Select the Home Use
Mode. On the Use Mode screen, select the Home Use mode using your remote,
and then select Next. The Network Settings screen appears.
✎ Store Demo mode is for retail environments only. If you select
Store Demo, some functions will not work, and the TV will reset all
functions to their factory default after a certain period of time. For
more information about Store Demo, go to the end of this section.
3
Network Settings:
Configure the
network settings
✎ To configure
later, select Skip.
You can set up
the network
connection later
using the on-
screen Network
menu.
To configuring your network settings, select Next using your remote, and
then go to 3A - Wireless Network or 3B - Wired Network on the next
page.
If you do not know your network configuration information or want to
configure the settings later, or do not have a network, select Skip, and
then go to 5 - Auto Program (1) on page 18.
To configure network settings later, refer to “Setting up the Wired or
Wireless Network” in the e-Manual or see the Network Connection
sections in this manual (pages 12 and 24).
[UE6100-ZS]BN68-04498B-00.indb 16 2012-04-23 �� 10:28:13