Samsung L730 - Manual (Page 14)

<< 13 >>
Connecting to a Power Source
You can charge the rechargeable battery SLB-0937 by using the SAC-
46 KIT which consists of the AC adapter (SAC-46) and the USB cable
(SUC-C2). When the SAC-46 and SUC-C2 are combined, they can be
used as an AC cable.
Using an AC cable
: Connect the AC adapter(SAC-46) to the USB
cable. It can be used as a power cable.
Using a USB cable
: Remove the AC adapter (SAC-46).
You can download stored images to your PC
(p.98) or supply the power to your camera
through the USB cable.
Important information about USB cable usage.
Use a USB cable (SUC-C2) with the correct specification.
If the camera is connected to the PC through a USB hub :connect
the camera directly to the PC.
the camera and other devices are connected to the PC at the
same time : remove other device.
If the USB cable is connected to a port located on the front of the
PC : remove the cable and connect it to a port located on the back
of the PC.
If the USB port of the PC doesn't meet the Power output
standard(5V, 500mA), the camera may not be charged.