Samsung L730 - Manual (Page 26)

<< 25 >>
Using the camera buttons to set the camera ZOOM W / T button
The recording mode function can be set up by using the camera buttons.
Used for turning the camera’s power on / off.
If there is no operation during the specified
time, the camera's power will be turned off
automatically to save battery life.
Refer to page 56 for more information about
the auto power off function.
POWER button
Used for taking an image or recording voice in the RECORDING mode.
In MOVIE CLIP mode
Pressing the shutter button down fully starts
the process for recording a movie clip.
Press the shutter button once and the movie
clip is recorded for as long as the available
recording time in the memory allows. If you
wish to stop recording, press the shutter button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and
checks the condition of the flash. Pressing the shutter button down fully
takes and stores the image. If you select voice memo recording, the
recording will start after the camera has finished storing the image data.
SHUTTER button
If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.This camera has a 3X optical zoom
and a 5X digital zoom function.
Using both will offer a total zoom ratio of 15X.
TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button. This will zoom
into the subject i.e. the subject will appear
nearer.
Digital zoom TELE : When the maximum (3X) optical zoom
is selected, pressing the ZOOM T button
activates the digital zoom software. Releasing
ZOOM T button stops the digital zooming at
the required setting. Once the maximum digital
zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
[WIDE zoom] [TELE zoom] [Digital zoom 5.0X]
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button